Tile Adhesive C2TE
Tile adhesive C2TE, 20 kg bag
Tiler spreading adhesive

Holds large tiles where they are put

Tile Adhesive C2TE

$17

A polymer-modified, non-slip adhesive for porcelain and stone.

150 L water saved / tonne26 kg CO₂ avoided / tonne

Thin bed uses a third of the material of a sand-cement screed.

Pack size · 20 kg bag
Shade
1
The product

C2TE grips large-format tiles on walls without slumping and gives you thirty minutes of open time to adjust them.

Use it on floors, walls, tile-on-tile and wet areas.

Technical data

Cement, graded sand and redispersible polymer.

Class
EN 12004 C2TE
Coverage
4 to 5 m² per bag
Bed
3 to 6 mm
Pack
20 kg
Specs & handling

Tile adhesive · EN 12004 C2TE · Eastgate dry-mix plant Read the full guide

  • Batch certificateSent with every order.
  • Site deliveryUnloaded where you need it.
  • Sealed-bag returnsWithin 14 days of delivery.
Not sure which grade or how many bags? Ask a sales engineer
150 Lof water saved per tonne against a conventional wet-process plant

Specs & handling

A polymer-rich, non-slip adhesive for porcelain slabs and natural stone, on floors, walls and tile-on-tile.

Type
Tile adhesive · EN 12004 C2TE
Plant
Eastgate dry-mix plant
Strength
Tensile adhesion 1.4 N/mm²
Pack
20 kg bag
Setting time
Open time 30 min · grout after 24 hours

Storage & handling on site

  1. 01Store sealed, dry and off the floor.
  2. 02Mix with 5 to 5.5 litres of water per bag.
  3. 03Comb a 3 to 6 mm bed and back-butter large tiles.
  4. 04No soaking of tiles needed.

Styled together

Often ordered together

Shop everything
OPC 53 Grade Cement
Best seller−8%

Grey cementBulk delivery · 1 wk

High early strength for structural work

  • OPC · ASTM C150 Type I
  • 50 kg bag
310 L water saved/tDetails
OPC 43 Grade Cement

Grey cementBulk delivery · 1 wk

The dependable all-rounder

  • OPC · ASTM C150 Type I
  • 50 kg bag
310 L water saved/tDetails
PPC Fly-Ash Cement
Low carbon

Grey cementBulk delivery · 1 wk

Denser concrete, lower carbon

  • PPC · ASTM C595 Type IP
  • 50 kg bag
420 L water saved/tDetails
PSC Slag Cement

Grey cementBulk delivery · 1 wk

Built for ground and coast

  • PSC · ASTM C595 Type IS
  • 50 kg bag
440 L water saved/tDetails
Rapid Hardening Cement
New

Grey cementBulk delivery · 1 wk

Strike the forms tomorrow

  • RHC · ASTM C150 Type III
  • 50 kg bag
290 L water saved/tDetails
White Portland Cement

White cement & putty

89% whiteness, full strength

  • White OPC · ASTM C150 Type I
  • 25 kg bag
180 L water saved/tDetails
Acrylic Wall Putty
12% OFF

White cement & putty

Acrylic Wall Putty$16.50$14.50

The smooth base under good paint

  • White cement putty · polymer modified
  • 20 kg bag
160 L water saved/tDetails

Good to know

Questions about this piece

All questions

Use OPC 53 for structural concrete such as columns, beams and slabs. OPC 43 suits general concrete, brickwork and plaster. PPC and PSC are best for foundations, mass pours and anything exposed to water or salts.

Made with ❤️ Appsketch