Best seller−8%
Grey cementBulk delivery · 1 wk
OPC 53 Grade Cement$12.50$11.50
High early strength for structural work
- OPC · ASTM C150 Type I
- 50 kg bag
310 L water saved/tDetails
+1 (555) 018-4470 orders@bastioncement.example Dispatch Mon–Sat, 7:00–18:30Get a bulk quote
The smooth base under good paint
Acrylic Wall Putty
$16.50$14.50
A white cement putty that fills, levels and bonds for life.
160 L water saved / tonne28 kg CO₂ avoided / tonne
No curing water needed on the wall.
Pack size
Shade · White
1
The product
Two thin coats fill pinholes and hairline cracks and leave a smooth, hard surface. Because it is cement-based it does not flake when walls get damp.
Paint covers further on it, so you use less.
Technical data
White cement, acrylic polymer and fine mineral fillers.
- Coverage
- 1.5 m² per kg, two coats
- Coat thickness
- 1 mm
- Pot life
- 2 hours
- Pack
- 20 kg or 5 kg
Specs & handling
White cement putty · polymer modified · Northfield white plant Read the full guide
- Batch certificateSent with every order.
- Site deliveryUnloaded where you need it.
- Sealed-bag returnsWithin 14 days of delivery.
160 Lof water saved per tonne against a conventional wet-process plant
Specs & handling
A white cement putty with acrylic polymer that bonds to plaster and concrete, fills pinholes and cuts paint use by up to a fifth.
- Type
- White cement putty · polymer modified
- Plant
- Northfield white plant
- Strength
- Bond strength 1.1 N/mm²
- Pack
- 20 kg bag
- Setting time
- Pot life 2 hours · recoat in 4
Storage & handling on site
- 01Keep bags sealed and off the floor.
- 02Mix with clean water to a smooth paste and rest it for 10 minutes.
- 03Apply two coats of about 1 mm each.
- 04No water curing needed.
Styled together
Often ordered together
Grey cementBulk delivery · 1 wk
OPC 43 Grade Cement$10.50
The dependable all-rounder
- OPC · ASTM C150 Type I
- 50 kg bag
310 L water saved/tDetails
Low carbon
Grey cementBulk delivery · 1 wk
PPC Fly-Ash Cement$9.50
Denser concrete, lower carbon
- PPC · ASTM C595 Type IP
- 50 kg bag
420 L water saved/tDetails
Grey cementBulk delivery · 1 wk
PSC Slag Cement$9.90
Built for ground and coast
- PSC · ASTM C595 Type IS
- 50 kg bag
440 L water saved/tDetails
New
Grey cementBulk delivery · 1 wk
Rapid Hardening Cement$13.50
Strike the forms tomorrow
- RHC · ASTM C150 Type III
- 50 kg bag
290 L water saved/tDetails
Mortar & plasterBulk delivery · 1 wk
Ready-Mix Plaster$8.50
Plaster without the sand heap
- Cement-sand plaster 1:4
- 40 kg bag
220 L water saved/tDetails
Mortar & plaster
Thin joints, straight walls
- Thin-bed mortar · polymer modified
- 40 kg bag
260 L water saved/tDetails
Mortar & plaster
Made for the bricklayer's trowel
- Masonry cement · ASTM C91 Type N
- 40 kg bag
200 L water saved/tDetails
Use OPC 53 for structural concrete such as columns, beams and slabs. OPC 43 suits general concrete, brickwork and plaster. PPC and PSC are best for foundations, mass pours and anything exposed to water or salts.